Hydraulic Hot Plate Welding Machine Hot Melting Welding Machine

DESCRIPTION

Basic Info

Power	Ultrasonic
Transport Package	Wooden Case
Trademark	BOYI
Origin	China
HS Code	8515809090
Production Capacity	500sets/Year

Product Description

Item		Detailed Information
Item		Detailed Information
Equipment Introduction		This equipment has been applied to the riveting of automobile headlights and the punching and cutting of circuit boards. It adopts the mode of one die and two holes. The left and right mirror parts are welded and punched together.The number of riveting points is 60, and the temperature is controlled by region.
		Gas-liquid supercharging mechanism, output force up to 5 tons.
		10 sets of welding programs can be pre-stored, and the data interface can run in tandem with the production line.
		Japan MISUSI original heating device. Hot plate temperature control, with self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees.
		Equipped with man-machine interface and Chinese and English bilingual interface operation.
		The cooling system is air-cooled by blowing air.
		Production cycle time 25S-35S.
Equipment Features	Man-Machine Engineering	Safety: the machine is equipped with protective grating and scald warning safety baffle.
		Permission management: device setting administrator and operator permissions.
		The work table height is 9000MM.(Operation by standing position )
		The quipment starting mode: The equipment is started by pushing two starting buttons together with two hands.
	Equipment capability/Quality traceability	The device has the protection function of misoperation(the machine will not work if the machine is not operated according to the standard operation procedures).
		Production records:The equipment can meet customer requirements for recording and storage of product capacity.
		Alarm failure and code recording:The equipment automatically displays the alarm fault code and records it automatically
		Man-machine interface - visual information of man-machine interface includes current operation steps, alarm information and solutions.
		IMS interactive function: support Ethernet communication. The equipment has the function of QR Code scanning and identification. The data of hot plate temperature, displacement and time can be recorded and sent to the company's IMS system. (This function is customized according to customer requirements.)

	Equipment Clamp/Quick die change	The equipment can be independently equipped with a die changing car. (this item is customized according to customer requirements)
		The Clamp of the equipment is fixed by simple, fast and reliable fixing method such as locating pin, without special tools.
		The pneumatic part of the clamp and the sensor part of the device are designed with quick plug and pull.
		Quick die change time is 10-15 minutes.
	Electrical layout/Safety	The equipment has tooling recognition sensor, which can judge whether the tooling is required for online production. If not, the equipment will alarm.
		Locking function: in case of equipment failure or clamp installation error, the product is locked to the corresponding station (it needs to be unlocked by the designated personnel).
		Equipment alarm: when the equipment fails, the man-machine interface displays alarm information, and the control system locks the machine.
		Control system voltage DC24V.
		I/O- each station has a 10% I/O allowance for future expansion.
Technical Parameters		Equipment demension(L)1250MM(W)1000MM(H)2400MM.
		Equipment demension (L)700MM(W)450MM(H)400MM.
		Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.).
		The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA).
		Adaptable to ambient temperature: -5ºC~40ºC
		Adaptalbe to humidity : 20%~80%
		The noise of the transmission part shall not exceed 70 db.